Styrene

Styrene

Friday, October 19, 2012

Modelism International 1/72 photoetched Vuia I

This is the building article, for the completed model go here:
https://wingsofintent.blogspot.com/2012/10/vuia-model-completed.html

Tiny Romanian model sold in that country at the museum where a replica is exhibited. I got it from a fellow modeler long time ago, and only now got the courage to start it.
It is not the best of the photoetched models I have seen, and many parts had to be corrected. It has design  and etching flaws that will need some of your talents in order to be overcome.
I believe photoetched sets are a good detailing tool, and, to a certain extent, can represent structures of adequate rigidity, but the idea of a whole model made of photoetched parts is not really good. Invariably, some parts will not be satisfactory when represented in that medium, and a good kit should be a multi-media kit, to get the best of each world and not compromised solutions. This is exactly the case for this model, being built for a fellow enthusiast.

The instructions are so-so. There is more of some written sequence (in French) than step-by-step graphics. The 3view is out of scale. There is a good part map, and sort of not really clear sub-assemblies photos. A few parts are not at all well solved, like 11, 16 and 4 (adding to the unusable flying surfaces, see bellow).
The flying surfaces, as presented, are not realistic at all; besides the wing being not totally accurate. I replaced them. Some photoetched items were again not accurate or two bi-dimensional and were replaced too. A "stitching" seam was created using "stitches" from an aftermarket detail set. The wing in the original plane was held in place by two structural members on top of it, and other two under it; the latter absent from the kit.
Bear in mind that this machine was modified a number of times and the kit describes a particular one (although in general terms).
I was very skeptical about the prongs that are supposed to be the axles for the wheels, so I glued a thin brass rod all along the axles' line to provide for a more credible –and rigid- arrangement. I substituted the kit’s before-mentioned “wing poles” for a “V” arrangement also in brass rod.


Wednesday, October 17, 2012

1/87 Highway Miniatures 1913 Ford Fire Truck (injected styrene)

(The finished model is here:)
http://wingsofintent.blogspot.com/2012/10/187-highway-miniatures-1913-ford-fire_18.html


When I opened the package of this kit (which I bought in NYC*) -a 1/87 fire truck to include in my diorama "Do Volkanos Need Fire Departments?"- I was truly surprised by the cost/quality ratio, very, very favorable. More than 40 injection-molded parts, well defined, almost no flash, very good detail. Bear in mind that the scale is even smaller than 1/72, therefore the parts are generally tinier. The sprues were intelligently arranged.
These kits (there are several from the same manufacturer) sell for a reasonable price.
This is, of course, a kit mainly oriented to the railway model enthusiasts’ market.
Now, why airplane kit manufacturers can't achieve that level? Why many other kits from a large list of manufacturers are chunky, clunky, badly detailed, have much less parts, and cost much more? Something no doubt Heraclites, Heidegger and Hegel pondered about.
I mean, fellas, look at the photos. Then compare them with the production standards of many of the 1/72 airplane kits you have in your stash.
Exactly.
Don’t worry, is OK to cry. Even tough men can cry for the good reasons.
Have you seen the tiny white metal kits and accessories the train guys have for their dioramas? And their resin kits? How well they are made and how fairly-priced they are? Now now, do not cry again. Here a handkerchief.
See what I mean?
In any case, the model built well, whit only minor adjustments needed. The instructions were good, although there are more “written” steps than actual drawings. I think a couple more drawings would help a tad.
I only added MV lenses and a couple of wire items, since the kit’s detail is wonderful on itself. 

*The place I bought this model is the Red Caboose, in New York City. I highly recommend it to all real hobby enthusiasts that like places crammed with goods, and stores were you go “hunting” for hidden treasures.

















Thursday, October 11, 2012

Mattern's Lockheed Vega finished

The 1/72 scale MPM kit of the Lockheed Vega was used to create this version. 
For the building article  please see here: