Styrene

Styrene

Monday, January 28, 2013

1/72 Planet Models Focke Wulf A.16 resin

(this is the building/review article, to see the completed model please go here:
http://wingsofintent.blogspot.com/2013/02/planet-models-172-focke-wulf-a16.html

If you look carefully at it, you may notice that regarding its configuration, the FW A.16 has similarities with the bird-like, much earlier Etrich/Rumpler Taubes. The “V”-shaped tail and especially the “feathered” wings –in the “zanonia” seed style- were common to many designs of the time.
That planes attempt to resemble birds should not surprise anybody. The A.16 is a chubby, stubby, stumpy particular kind of bird though. It could carry three passengers and provided a reliable service during its career.
Planet Models used to be mostly known for its Luftwaffe 46 models, but lately, in a very fortunate and welcome change of direction, has been releasing interesting kits of civil German subjects of the Golden Age of Aviation. I congratulate Planet models on these recent subject choices (that include the Focke Wulf Fw19 Ente, Lockheed Air Express, Messerschmitt M.20, and many other beautiful planes).
This particular kit has been already reviewed and built many times and you can easily find articles posted on the Net, so I won't be too exhaustive here regarding its presentation.
I owe the pleasure of having and building this kit to the generosity and kindness of Jim Schubert, an Irregular Pugetian that breeds Furry Dwarf Black Mutant Seals on the shores of the Sound, near Boingland. The kit came without transparencies or decals (which were donated to a dangerous character of the Modeling Underworld named Tim Nelson so he could complete his own model) but Jim kindly added a better, more accurate pair of white metal wheels from Aeroclub, plus a more accurate prop plus weight placard decals. For all that I thank Jim, forgive him and grant him indulgence for all his modeling sins.
At it:
It took some time to remove the pouring blocks from the wing halves, and especially from the fuselage sides, where the lugs were strangely located and did not facilitate their removal at all. Planet kits are generally good, and this was also the case. Tim Nelson mentions in his review that he got a wing root thicker than the other, and some misalignment in the fuselage. Not the case for my own sample, fortunately. As you know resin kits are produced in a sort of artisan way, so samples tend to vary. My kit could not escape, though, the occasional bubble and pinhole. Some of those were located in my sample in the rudder bar and pedals (which crumbled-down on me) and beneath a control horn that popped off too. Beware that some tiny holes on the wings close to the ailerons and not pinholes, but the exit points for the control cables. The casting web that holds the smaller parts was thick and not very easy to remove, but some areas of it were thinner and the parts separated more easily. As you can see in the photos I did not bother with the seats’ legs for which I can use styrene or metal rod instead of struggling to clean up those minute items. Beware that there are very tiny parts on that casting web, look for them and be careful separating them, especially some minute steps that are very easily overlooked.
There were thick mold lines underneath the fuselage halves and a couple other parts that had to be removed and smoothed out.
As it is always the case with resin kits, you should use a dust mask to avoid -while sanding and cleaning- the resin particles which are harmful.
The instructions are indifferent and have the usual couple of dark/confusing spots; nothing you could not overcome paying a little attention, though. The decals –again, I did not get those since there were given to other modeler- cover one subject, a Lufthansa machine.
If you feel tempted, like me, to branch out and do something different than all what the other modelers already built, beware that there were 4 subsequent variants of the A.16, and the kit caters for only one (“a”). The variants (a, b , c and d) had different noses, engines, lengths, fin/rudder and even different span in one case (the first machine). So be careful and check you references.


I used home-made decals and did some research regarding the colors. I ended up using my own recipe for “Silbergrau”, in two tones: one for the general plane and a slightly darker hue –as per photos- for the cabin exterior, which in the original had wood panels; I employed black for the wing stripes and aluminum for the nose and wing tanks.
My main reference is the Jet&Prop publication on the type. You may also read John Stroud's more generic article in Aeroplane Monthly of Jan 1987. Much help was provided by the above-mentioned Jim Schubert, the Volkano Evil Genius Soenke Schulz and other equally-kind colleagues and fellow modelers.
The fuselage cabin and cockpit parts have been glued and sanded to fit inside the fuselage
(beware that the cabin floor has on one side a swept-upwards finish. That side goes to the back):
The cabin ensemble has been sanded in some areas and supplemented in others in order to fit  
 Seats, shelf, instrument panel also worked on:
 radiator had its conduits replaced for alu rods:
The original plane had a flower vase. The kit provides a little platform. I decided to scratch a better vase and made the "flowers" with mushroomed stretched sprue that I later painted:
 
The first vase was too big, so I made another:
 Control surfaces separated to pose them more realistically, molded horns erased:
 Furrows cut in and new metal horns installed:
  The interior being furnished and positioned:
A general view of the components. The prop, which as said was also provided by Jim, has the correct diameter. The kit's is shorter and slightly wrongly shaped.
The home-made decals can be also seen. I selected "Osnabruck 2" as my subject.
Fuselage halves have been joined with epoxy. Metal rod spars were used to attach and tail feathers:
 Front end and engine top fairing glued:
A two-layer decal (white and blue) was printed for the prop, since I do not have an ALPS, I used white stock for the first layer and a dot of white paint for the star background (the camera unfortunately focused on the clothespin): 
 
 At this point things tend not to look very neat, with the putty patches, the sanding, etc:
 
 The tail-skid and fin were added, using a metal pin for the fin:
As model builders know, even when the model starts to look complete, it is far from it. Details need to be worked out and pace turns slower, as any boo-boos at this stage could be costly. 
 The search for the elusive silbergrau hue rendered convincing results after some brewing and concocting:
(the ulterior application of hue will subdue a tiny tad the metal shine)
I used home-made decals and did some research regarding the colors. I ended up using my own recipe for “Silbergrau”, in two tones: one for the general plane and a slightly darker hue –as per photos- for the cabin exterior, which in the original had wood panels; I employed black for the wing stripes and aluminum for the nose and wing tanks:

Saturday, January 26, 2013

Highway Miniatures 1/87 1925 Ford Mail Truck

If Highway Miniatures would produce kits in 1/72, I could become addicted and try to buy them all. Nonetheless, even if they are 1/87 scale (and not totally compatible with my 1/72 endeavors) I still buy them and find them extremely attractive.
Other products of this company were posted here before, and now I started this mail truck as a photographic companion for future model photo-session only ephemeral dioramas.
Again, the quality-price ratio is phenomenal. The molds are detailed, fine, have minimum flash, depict the original to a high degree, and in this case even come pre-colored.
Notice also the decal sheet, instructions and screen material. What else can you ask for when you pay less than $ 10? Is this some kind of miracle? an hallucination product of the glue vapors? if this is real, why airplane kit manufacturers struggle to produce such fine detail and are far from charging such a modicum price?
Whatever the reasons, I LOVE these little kits. The clear material provided for the windshield has even red marker lines so it won't slip inadvertently and will be easy to find. What a nice detail. These guys, whoever they may be, know what they are doing.
As you can see, I separated the parts from the sprues DELICATELY, cleaned them up, and got them ready for some painting and assembly.
There a few minor points: the mesh provided -which is great, by the way- is weaved horizontally/vertically. The real mesh was diagonal -as per actual photos-. You may cut the pieces you need from it, wasting some of the material, but you may run short. In the photos I have of the actual truck there are two lights -besides the "normal" ones- on the front of the cabin, missing in the kit. The position of the floor -and a couple other parts- is not very clear from the instructions. Again, minor issues compared to the excellent level overall.
I used MV lenses for the front lights, a decal to depict the radiator,and another red MV lens to represent the back light.The whole building process took only a few hours through three days. You have to use good magnification and be careful due to the minute nature of the parts, but it felt like a breeze and looks just nice.
The images show now some parts glued together.
Some images of individual parts to show size and detail, all amazing for this scale compared to similar airplane parts:
 The main sub-assemblies have been painted with enamels and airbrush:
 MV lenses were added and two decals (metal base and pattern) to represent the radiator:
 The patterns for the screens (which have diagonally-weaved wire in the original truck) are laid over the plastic mesh kit material. They are a tight fit:
I ended up having to split the back panel mesh -as in reality- so the provided material will be enough. All worked out well.
 
 I needed to make my own decals for the air mail truck, with rub-on characters on a piece of decal sheet: