RWD-8 DWL (civil) - PZW 1/72nd scale injected kit plus some aftermarket items

 

 Simple, elegant small civil planes have an irresistible charm. Usually building them is accomplished without much trouble, they do not take much time, and can be handled easily A nice detail can be added here and there to perk up the final product. For me they are great "in between" projects when dealing with bigger, more complex models.

Some old kits tend to hold their own well thru time. This is one example of that. I have built it before (from a kit courtesy of Evil Genius Soenke S.) -with some necessary improvements- as the flying surfaces’ detail is overdone and the kit is missing the oil reservoir on the fuselage lower left after the engine. Other small details can be added or modified too to improve the result:

https://wingsofintent.blogspot.com/2019/01/rwd-8-172-completed.html

There is a newer IBG kit, that for what I can see online is better in some respects, but seems to need help in others too.

For this build I will be using some aftermarket details in the form of Part P.E. details, an adapted Dekno Models 3D-printed engine, and Yahu instrument panels.  Sagittarius Polish decals should complete the package (remainder regs on the sheet that I used before). At some point there was on the market a replacement set of wings and other details (for the IBG kit, but perhaps adaptable), but I don’t see them anymore. A cloned iteration of this PZW-72 kit was released by ZTS Plastyk. Another release by Mistercraft seems to include the oil tank (omitted in the others) molded on the fuselage.

The areas not to be puttied are masked:

The intrados molded anchoring points for the struts are removed as they are out of scale. Locating holes are drilled instead:

Putty applied on the wings, sanded, and the masks removed. The elevator horns, again off scale, are removed:

In order to enhance the model, the fuselage sides need an intervention:

Work starts on the fuselage. The exit point of the external control cables is drilled. A luggage compartment is cut out, the front of the fuselage sides is cut and one "cheek" opened to eventually show the engine:

The oil tank space is cut, remaining plastic in some spots is removed to clear the way for the engine:

Part of what will be used to enhance the model. Only some of the P.E. parts will be added, and the engine needs a couple touches to better resemble the original Walter:

Flying surfaces ready to prime:

Diverse holes for control cables, rigging and horns are drilled:

The footholds are cut open (will be backed from inside with small pieces of styrene sheet). The air intake for the engine is slightly enlarged, and the walls thinned from inside the part:

Strangely, the kit is missing the anchoring points for the external cabane struts, perhaps the designer thought of just butt-joining them. These are drilled as I will be utilizing more to scale Strutz brass material (once again thanks to John Adams of Aeroclub fame and Andrew Nickeas of Fogland):

What's left of the Sagittarius decal sheet I used for the previous model will be utilized here:

 

HEY! IS NO KINGS DAY!

The other parts are separated from the sprues. Some will be substituted for better home-made items. The prop is cleaned up and thinned:

 

To be continued...